SELECON PLCYC1 MARK II

Delivering a smooth even beam, the PLCYC1 Mark II LED seamlessly blends intense washes of colour on cycloramas up to 5m high. Using LED source technology combined with a properly shaped asymmetrical reflector, the PLCYC1 Mark II delivers consistent light distribution without the compromising performance of vertical or horizontal spreader lenses. Each luminaire can replace the equivalent of a traditional four colour 1000W per circuit Cyc luminaire, and with the convenient powercon system, the PLCYC1 Mark II can light a typical cyclorama with a single 10A non-dim circuit. The PLCYC1 Mark II LED luminaire has an on-board LCD menu system for setup, control, and addressing. The menu system is intuitive and offers all configuration options with a few button presses. All PLCYC1 luminaires now have RDM functionality, allowing you to quickly configure your PLCYC1s over your lighting control network. The Philips Strand Neo Control Console supports RDM patching. All PLCyc1 luminaires support wired DMX512 control with a choice of 8- or 16-bit control resolution. With the increased development of LED luminaires like PL1 and PLCYC1 with 4 or more colours, additional control is needed for intuitive operation. All Philips Strand Lighting Neo family controls now support extended colour control to simplify programming and luminaire colour matching.

Contactar
  • ● Single RGBW LED array delivers limitless colour mixing capabilities and superior consistency.

  • ● Single units mean it is no longer necessary to change lamps or mix the colour on the cyclorama using multiple fixtures. One source allows multiple colours.

  • ● Fading between colours is seamless and allows designers a new level of creativity.

  • ● Homogenised fully mixed light, no multiple colour shadows.

  • ● Asymmetric reflector directs more light downward to produce visually even illumination down a vertical surface.

  • ● Quick selection of colour pre-sets.­­­

  • ● Can be used as a top cyclorama or a groundrow simply by rotating the yoke.

  • ● No need for dimmers, connect directly to mains supply.

  • ● No need for lamp replacement or filter maintenance.

  • ● Onboard LCD Menu for ease of addressing/setup.

  • ● Fitted with rated safety cable.

  • ● Colours: Black

  • ● Weight: 3.3kg / 7.1lb (luminaire only)

  • ● Standards Compliance: cETLus, C-Tick and CE Marked

  • ● Source: 1 each, true RGBW 120W LED chip

  • ● Output: > 2000 Lumens (white light)

  • ● Operating Voltage: 100V–240V AC (auto-ranging)

  • ● Frequency: 50/60Hz

  • ● Current Draw: 1.2A at 120VAC, 0.6A at 240VAC - Maximum load with all LEDs at full RGBW

  • ● Ambient Temperature : 0°–40°C

  • ● Control: On-board menu / DMX512

  • ● Construction: Aluminium, sheet metal, and molded engineering grade plastic components

  • ● The LED Engine: The PLCYC1's powerful LED engine offers exceptional performance and life. Under normal operating conditions our LED engine has a life expectancy of 50,000 hours. The Philips Selecon three-year limited warranty includes our guarantee against premature failure of the LED engine.

  • ● Colours: Black

  • ● Weight: 3.3kg / 7.1lb (luminaire only)

  • ● Standards Compliance: cETLus, C-Tick and CE Marked